Awnings Range Product Range
This Awning is used with J hooks hung from shop awning and is raised and lowered manually with rope. The J hooks hold the Awning in place when it is in down position. It is ideal for providing shade to shop front windows, usually covering the total width of the shop front. Company logos or product details can be sign written to Awnings making the shop more noticeable from the street.
This Awning has a spring loaded top roller and guide rails fitted flush to the wall with standout arms. The Awning is adjusted by guiding the arms up and down the rails. It will automatically lock in when the arms are released in a 90 degree position. This Awning is operated by hand from outside, resists high winds and ideal for ground floor applications, narrow walkways and situations that require the Awning to be as close to the window as possible. Arm sizes from 150mm standouts through to 600mm (increments of 150mm).
Similar to standard automatic lock arms but with aluminium components, 3 sided headbox which allows mounting brackets to be positioned anywhere along the width (instead of at the end of the Awning) the arms can also be positioned on the bottom rail where required. This allows the Awnings to be installed on cladded and fibro walls without the use of unsightly bracing.
To operate this blind pull down by hand or for higher installed blinds use the pull down pole. The top roller has a spring so that as you pull the blind down the blind is tension. This blind is designed to be pulled down to a hand rail, where the bottom rail can be attached to snap hooks. Fabrics available Screen / mesh, acrylic and canvas.
The Casement Window Awnings is also based on the Convertible style awning, with double arm system.The first set of arms is stopped by chain attached to wall. (This product is manufactured in Australia).
This is the most popular type of Awning due to its versatility. It is suitable for both ground floor and upper level applications and can be operated externally with rope, tape or a winch or internally with tape or a winch. Optional hoods are available in 16 colours, to protect the fabric on the roller when retracted. Apollo’s Convertible Awning uses a 5 sided bottom rail, which is available in 12 colours, with spring loaded arms for better Awning stability.
This is a very versatile awning that can be operated either internally or externally and is suitable for lower and upper levels. It can be operated either by rope, tape cord lock, crank and motorised options. The Flexi Fit System allows the fabric to protrude past the end fixing points, making it suitable for fibro and cladded homes where fixing points are limited. The Flexi Fit pivot arm system is also available in slide rail and double arm option.
This is based on the Convertible Awning. It has guide rails connected flush to the wall. Pivot arms can be slid up and down the rails once the Awning is out, to allow more clearance under the awning. This is ideal for doorways and balconies.
Pivot Arm Awning is a heavy duty awning suitable for high wind areas and wide window applications.It spans widths up to 4200mm and area coverage of 16.8 square metres. Available in motorized option, which can be coupled with sun and wind sensor for optimum control.
The Fixed Guide Awning is ideally for homes with high, hard to reach windows. It shades your windows from direct sunlight without losing out on fresh air and breeze. It can be adjusted with a crank or motorized option.